133
4.3
Camera Setup
Select the camera from different DVR servers in order to monitor on same screen. The selected
cameras will be played on
Monitor
screen (see also
1.
Click
Setup
from CMS main interface.
2.
In the Authorization dialog box, enter the administrator User ID and Password.
3.
Click
Camera
.
4.
Click
Add
to create a monitor set. Enter a name in
Name
column (12 characters only).
i
The maximum number of Monitor is 128.
5.
Mark
Enable Autoscan
and click
Detail
to select the monitor set for sequential display on the
Monitor. When monitor set is an auto scan monitor set, it is no need to select any cameras for
monitoring.
6.
Enable
Add into Autoscan
list will make the monitor set became one of auto scan list.
7.
To record the cameras video, mark the
Record
box. Otherwise, the cameras video will not be
saved on the CMS system hard disk.
8.
Mark
Show Server Time
to display the time on Monitor screen.
9.
If user wants to playback the recorded video of monitor set, mark
Enable Playback
and enter
the time (sec.) in
Start Playback Before
that is when start playback will start from the present
time backward the time user has setup. To display the POS information on monitor screen, mark
Show POS message
. User can set the camera transmitting
Frame Rate
, but the real
transmitting frame rate depends on camera setting.
10. Click
OK
to save the setting.
