Page 12 of 13
Exceleron DayLite
TM
AVE-EX9-IM
Issue 01
INSTALLATION MANUAL
IMPORTANT NOTES:
Under no circumstances should any power supply other than a 9-36V DC, or a
14 or 28 Volt battery be used to test the light. Do not use: Battery chargers,
battery back-up power devices, or other bench avionics testing methods to
test the aviation light. The light is functional between 9 and 36 volts. Use of a
battery charger or other power unit to test the light will void the warranty and
may damage the light.
If you have any questions about the installation of the lights, please refer to
our web site: www.aveoengineering.com.
1.12
Notes on Installation
Stainless steel screws SHCS #8-32 UNC or equivalent mounting screws are
recommended to be used for installation. Screw length depends on placement of
screws on aircraft.
Spread the tightening forces evenly around the mounting hole.
1.13
Continued Airworthiness Information
Periodic Inspection Procedure for Exceleron DayLite.
The Exceleron DayLite
light should always be checked for proper operation
during preflight. This procedural information is already provided in all general
aviation aircraft flight manuals.
The lights should be visually inspected for general condition, proper operation,
and correct installation at each annual and/or 100 hours inspection. In
addition refer to section 1.10 of installation manual for detailed cleaning
instructions.
