Avaya X330W-2DS1 Скачать руководство пользователя страница 90

Страница: 90 / 176

Chapter 7

X330WAN CLI Commands

Avaya X330W-2DS1 User’s Guide

ip admin-state (Interface context)

Use the

ip admin-state

command to set the administrative state of an IP

interface. The default state is

The syntax for this command is:

ip admin-state

ip bootp-dhcp network (Interface context)

Use the

ip bootp-dhcp network

command to select the network from which

the bootp/dhcp server shall allocate an address. This command is required only
when there are multiple interfaces over the Fabric. The

form of this command

restores to the default.

Note:

This command is executed from the Fast Ethernet and Fabric Fast Ethernet

interfaces.

The syntax for this command is:

[no] ip bootp-dhcp network

Example:
To select the network 192.168.169.0 as the network from which an address shall be
allocated for bootp/dhcp requests:

X330WAN-2DS1-1(configure)# ip bootp-dhcp network 192.168.169.0

ip bootp-dhcp relay

Use the

ip bootp-dhcp relay

command to enable relaying of bootp and dhcp

requests to the bootp/dhcp server. The

form of this command disables bootp/

dhcp relay. The default state is:

disabled

The syntax for this command is:

[no] ip bootp-dhcp relay

up/down

Administrative state of the interface. The choices are

(active) or

down

(inactive).

ip net

The IP subnet

Содержание X330W-2DS1

















































































































































































Результаты поиска

Содержание X330W-2DS1

Отзывы:

Avaya X330W-2DS1, Руководство пользователя, Страница: 90 / 176

Результаты поиска

Содержание X330W-2DS1

Отзывы: