Avaya X330W-2DS1, Руководство пользователя, Страница: 121 / 176

Layer 3 CLI Commands
Avaya X330W-2DS1 User’s Guide 99
IP addresses:
192.168.66.23
Primary IP Address:
192.168.66.23
Primary IP Address was chosen by default
Preemption Mode: enabled
# of times Master: 2
# of received Advertisements: 0
# of transmitted Advertisements: 20
# of received Advertisements with Security Violations: 0
Virtual Router on VLAN: 1
Router-id: 2
State: BACKUP
Priority: 100
Advertisement Interval: 1
Last State Change: 00:00:00
Override Address Ownership Rule: No
Authentication Type: None
Authentication Key: ""
Master IP Address 0.0.0.0
Has 1 IP addresses
IP addresses:
192.168.66.24
Primary IP Address: 192.168.66.23
Primary IP Address was chosen by default
Preemption Mode: enabled
# of times Master: 1
# of received Advertisements: 0
# of transmitted Advertisements: 13
# of received Advertisements with Security Violations: 0
timers basic (Router-RIP context)
Use the
timers basic
command to set RIP timers. The
no
form of this command
to set the RIP timers to their default.
The syntax for this command is:
[no] timers basic <update> <invalid>
update RIP update timer, in seconds.
invalid RIP invalid route timer, in seconds.