Avaya X330W-2DS1, Руководство пользователя, Страница: 113 / 176

Layer 3 CLI Commands
Avaya X330W-2DS1 User’s Guide 91
show ip interface
Use the
show ip interface
command to display information for an IP interface.
The syntax for this command for the X330WAN is:
show ip interface
[<interface-name>|<IP interface>|<ip-
address>]
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Example:
To display all IP interfaces:
X330WAN-2DS1-1(configure)# show ip interface
Example:
To display all IP interfaces on one interface:
X330WAN-2DS1-1(configure)# show ip interface "FastEthernet 1"
Example:
To display specific IP interface information:
X330WAN-2DS1-1(configure)# show ip interface "FastEthernet
1.0"
Example:
To display the IP's interface:
X330WAN-2DS1-1(configure)# show ip interface 192.168.49.1
Output Example:
X330WAN-2DS1-1(super)# show ip interface
Showing 2 Interfaces
Serial 1:1 is down
interface-name The name of the interface whose information you
want to display
ip-address The IP address of the interface whose information
you want to display
IP interface A string (up to 32 characters).