Avaya X330W-2DS1 Скачать руководство пользователя страница 107

Страница: 107 / 176

Layer 3 CLI Commands

Avaya X330W-2DS1 User’s Guide

The syntax for this command is:

[no] ip vrrp

<vr-id>

preempt

Example:

X330WAN-2DS1-1(configure)# ip vrrp 1 preempt

(ip vrrp) primary

Use the

ip vrrp primary

command to set the primary address that shall be

used as the source address of VRRP packets for the virtual router ID. Use the

form of this command to return to the default primary address for the virtual router
instance. By default, the primary address is selected automatically by the device.

Note:

This command is executed from the Fast Ethernet and Fabric Fast Ethernet

interfaces.

The syntax for this command is:

[no] ip vrrp

<vr-id>

primary

<ip-address>

Example:

ip vrrp 1 primary 192.168.66.23

(ip vrrp) priority

Use the

priority

option to set the virtual router priority value used when

selecting a master router. Use the

form of this command to restore the default

value.

Note:

This command is executed from the Fast Ethernet and Fabric Fast Ethernet

interfaces.

vr-id

Virtual Router ID (1-255)

vr-id

Virtual Router ID (1-255)

ip-address

Primary IP address of the virtual router. This address
should be one of the router addresses on the Fabric.

Содержание X330W-2DS1

















































































































































































Результаты поиска

Содержание X330W-2DS1

Отзывы:

Avaya X330W-2DS1, Руководство пользователя, Страница: 107 / 176

Результаты поиска

Содержание X330W-2DS1

Отзывы: