Avaya WLAN Security Switch 2300 Series Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 74

Avaya WLAN Security Switch 2300 Series Скачать руководство пользователя страница 47

47

Avaya WLAN Security Switch 2300 Series Troubleshooting and Debug Guide

DOT1X Apr 11 20:45:38.007315 DEBUG DOT1X-PACKET: Cancelling retrans timer for
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:38.007354 DEBUG DOT1X: Received message 2 of 4way handshake from
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:38.007558 DEBUG DOT1X: Sending message 3 of the 4way Handshake
DOT1X Apr 11 20:45:38.007586 DEBUG DOT1X-PACKET: EAPoL packet of 125 bytes (with retransmit
set) sent to 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:38.007613 DEBUG DOT1X-TIMEOUT: set when_retrans timer for 5 seconds
DOT1X Apr 11 20:45:38.010168 DEBUG DOT1X-PACKET: EAPoL KEY packet received from
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:38.010195 DEBUG DOT1X-PACKET: Cancelling retrans timer for
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:38.010226 DEBUG DOT1X: Received message 4 of 4way handshake from
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:38.010268 DEBUG DOT1X-PACKET: sending 32 byte multicast key with index 1
to AP
DOT1X Apr 11 20:45:38.010376 DEBUG DOT1X-PACKET: sending 32 byte unicast key with index 0 to
AP

Once the exchange is done we send the resulting keys down to the AP.

DOT1X Apr 11 20:45:38.032664 DEBUG DOT1X: Sending message 1 of the Group Key Handshake

DOT1X Apr 11 20:45:38.032698 DEBUG DOT1X-PACKET: EAPoL packet of 131 bytes (without
retransmit set) sent to 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:38.044877 DEBUG DOT1X-PACKET: EAPoL KEY packet received from
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:38.044903 DEBUG DOT1X-PACKET: Cancelling retrans timer for
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:38.044933 DEBUG DOT1X: Received message 2 of group key handshake from
00:0d:54:98:99:6d

We then do the 2-way handshake to send the multicast group-key to the client.

Dot1x level 10 trace of dynamic WEP in pass-thru:

DOT1X Apr 11 20:33:04.695773 DEBUG DOT1X-CLIENT: new wireless client from 00:05:5d:88:d1:63 on
port 2, radio 2

DOT1X Apr 11 20:33:04.699969 DEBUG DOT1X-STATE: 00:05:5d:88:d1:63 transition from NOTHING
to CONNECTING
DOT1X Apr 11 20:33:04.703742 DEBUG DOT1X-STATS: 00:05:5d:88:d1:63, enters connecting --> 4371

«
...
45
46
47
48
49
...
»

Содержание WLAN Security Switch 2300 Series











































































Отзывы:

Нет отзывов