manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 35 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 35

4. Use the command 

captive portal profile <profile_number>

redirect-url

 to configure the redirect-URL.

WCP8180(config-cp-profile)#redirect-url ?

  WORD  Redirect HTTP URL (1-255 characters)

 Note:

The supported characters in the redirect-URL are the underscore (_), dash (-),
period (.), percentage (%), colon (:), forward slash (/), question mark (?) and the
equal sign (=).

 Note:

To enter the question mark (?) character in CLI, use the escape character which
is the back slash (\), before the question mark character.

For example, if the redirct-URL is 

http://www.google.com?test=ag

, you

must enter 

http://www.google.com\?test=ag

.

5. Use the command 

captive portal profile <profile_number> no

redirect

 to disable redirection.

6. Use the command 

default redirect-url

 to reset the 

redirect-url

 to the

default value.

Configuring the Web hostname in Captive Portals

You can configure a Web host-name to mask a Captive Portal IP address, from guest users.
A Web host-name helps restrict exposure of the WLAN 8100 system IP addresses to a guest
user.

 Note:

The default Web host-name is

 <random-string>.cp-login.com

.

1. Enter the wireless configuration mode of the ACLI.

2. Enter Captive Portal configuration.

3. Use the command 

captive-portal profile <ID>

 to go to the captive portal

profile.

4. Use the command 

web-hostname <avaya-guest.com> 

to change the Web

hostname.

5. Use the command 

default web-hostname

 to reset the Web hostname to the

default value.

ACLI reference for the Wireless LAN (WLAN) 8100

Avaya WLAN 8100 CLI Reference

August 2013     35

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов