manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 230 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 230

Table 71: show audit log command parameters

Parameter

Description

asccfg

Displays the audit log for ASCII configuration.

serial

Displays the audit log for serial connections.

telnet

Displays the audit log for Telnet and SSH
connections.

Enabling Audit Log Save Settings

About this task

Use the following procedure to enable Audit Log save settings.

Procedure

1. Enter Privileged mode of the CLI.

2. Enter Configuration mode by entering the 

config

 command.

3. Use the command 

audit log save enable

 to enable audit log save settings.

Configuring Secure Socket Layer services using CLI

About this task

The following table lists CLI commands available for working with Secure Socket Layer

(SSL).

Table 72: SSL commands

Command

Description

[no] ssl

Enables or disables SSL. The Web server operates
in a secure mode when SSL is enabled and in
nonsecure mode when the SSL server is disabled.

[no] ssl certificate

Creates or deletes a certificate. The new certificate is
used only on the next system reset or SSL server
reset. The new certificate is stored in the NVRAM with
the file name SSLCERT.DAT. The new certificate file
replaces the existing file. On deletion, the certificate
in NVRAM is also deleted. The current SSL server
operation is not affected by the create or delete
operation.

ACLI Reference for wired networks

230     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов