manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 215 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 215

default snmp-server host command

The 

default snmp-server host

 command restores the-old style SNMP server and the

standards based tables are reset (cleared).

The syntax for the 

default snmp-server host

 command is:

default snmp-server host

The 

default snmp-server host

 command is executed in the Global Configuration

mode.

The 

default snmp-server host

 command has no parameters or variables.

snmp-server location command

The

 snmp-server location

 command configures the SNMP sysLocation value.

The syntax for the 

snmp-server location

 command is:

snmp-server location <text>

The 

snmp-server location

 command is executed in the Global Configuration mode.

The following table describes the parameters for this command.

Table 57: snmp-server location command parameters

Parameter

Description

text

Specify the SNMP sysLocation value; enter an
alphanumeric string of up to 255 characters.

no snmp-server location command

The 

no snmp-server location

 command clears the SNMP sysLocation value.

The syntax for the 

no snmp-server location

 command is:

no snmp-server location

The 

no snmp-server location 

command is executed in the Global Configuration

mode.

default snmp-server location command

The 

default snmp-server location

 command restores sysLocation to the default

value.

The syntax for the 

default snmp-server location

 command is:

default snmp-server location

The 

default snmp-server location

 command is executed in the Global Configuration

mode.

ACLI reference for wired networks

Avaya WLAN 8100 CLI Reference

August 2013     215

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов