Avaya WLAN 8100 Series, Справочник, Страница: 202 / 382

mac-security auto-learning port command
The
mac-security auto-learning port
command configures MAC security auto-
learning on the ports.
The syntax for the command is
mac-security auto-learning port <portlist> disabledisable|{enable
[max-addrs <1-25>}
The following table outlines the parameters for this command.
Table 47: mac-security auto-learning parameters
Parameter Description
<portlist> The ports to configure for auto-learning.
disable|enable Disables or enables auto-learning on the specified ports.
The default is disabled.
max-addrs <1-25> Sets the maximum number of addresses the port learns.
The default is 2.
The
mac-security auto-learning
command executes in the Interface Configuration
mode.
no mac-security auto-learning command
This command disables MAC security auto-learning for the specified ports on the switch. The
syntax for this command is
no mac-security auto-learning port <portlist>
The
no mac-security auto-learning
command executes in the Interface Configuration
mode.
default mac-security auto-learning command
The
default mac-security auto-learning
command sets the default MAC security
auto-learning on the switch.
The syntax for the command is
default mac-security auto-learning port <portlist> [enable] [max-
addrs]
The following table outlines the parameters for this command.
Table 48: default mac-security auto-learning parameters
Parameters Description
<portlist> The ports to configure for auto-learning.
ACLI Reference for wired networks
202 Avaya WLAN 8100 CLI Reference August 2013
Comments? infodev@avaya.com