manualshive.com logo in svg

Avaya W310, Справочник по командам

Поделиться
Скачать
Avaya W310 Скачать руководство пользователя страница 425

Chapter 18

Avaya W310 Command Reference Guide

409

Example:

user-group 

User level: supervisor

Use the 

user-group

 command to create a user group or enter User Group command 

mode. The total number of user groups allowed is 256. Use the [no] format of this command 
to delete a user group.

Note:  Configure the users that belong the user group on the RADIUS server. 

all-users, 
home-gateway-
users, or
foreign-gateway-
users

Select to display all users or home or foreign users.
•

all-users

 displays both home and foreign users

•

home-gateway-users

 is where the “home” user roamed, this 

displays the user’s current (foreign) gateway. 

•

foreign-gateway-users

 is where the “foreign” user roamed, 

this displays the user’s home gateway.

<lap-name>

The Light Access Point (LAP) name for which you want to 
display user attributes.

<vlan>

Filter the display by Virtual LAN (VLAN) selection.

W310-1(super)# 

show users profile ip 10.10.10.10

 

        User account                        password               access-type

-------------------------------  --------------------------------   --------

root                              *****                             admin

twriter                           *****                             read-only

readwrite                         *****                             read-write

Syntax

Description

2 of 2

Содержание W310

























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды