Avaya W310, Справочник по командам

Страница: 383 / 440

Chapter 16
Avaya W310 Command Reference Guide 367
reset
User level: user, privileged, supervisor
Use the
reset
command to restart the W310 switch.
Syntax:
The syntax for this command is:
reset [<module number>]
Example:
To reset the switch:
reset powerinline
!
This command is not applicable.
set boot bank
User level: privileged, supervisor.
Use the
set boot bank
command to configure the software bank from which the switch
will boot at the next boot process.
Syntax:
The syntax for this command is:
set boot bank {bank-a | bank-b}
Syntax Description
<module number> 1
W310-1# reset
This command will force a switch-over to the master module
and disconnect your telnet session.
Do you want to continue (y/n) [n]? y
Connection closed by foreign host.