Avaya W310, Справочник по командам

Страница: 308 / 440

Chapter 11 W310 Port Commands
292 Avaya W310 Command Reference Guide
show intermodule port redundancy
User level: user, privileged, supervisor
Use the
show intermodule redundancy
command to display the intermodule port
redundancy entries.
Syntax:
The syntax for this command is:
show intermodule port redundancy
Example:
Related Commands:
Use the
set intermodule port redundancy
command to define the unique port
redundancy configuration of the switch
show port
User level: user, privileged, supervisor
Use the
show port
command to display port status.
Syntax:
The syntax for this command is:
show port [<mod_num>[/<port_num>]]
W310-1> show intermodule port redundancy
Primary-Port : 1/1
Primary-Port status : Disable
Secondary-Port : 1/2
Secondary-Port status : Disable
Syntax Description
[<mod_num>[/
<port_num>]] 1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
• To specify ports 1 to 5, type 1/1-5
If you do not specify a number, all ports are displayed.