Avaya W310, Справочник по командам

Страница: 301 / 440

Chapter 11
Avaya W310 Command Reference Guide 285
Syntax:
The syntax for this command is:
set port spantree force-protocol-migration <module/port>
Example:
set port spantree priority
User level: privileged, supervisor.
Use the
set port spantree
command to set the Spanning Tree priority of a port. This
value defines the priority of a port to be blocked if two ports with the same costs cause a
loop.
Syntax:
The syntax for this command is:
set port spantree priority <module/port> <value>
Syntax Description
<module/port> 1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
• To specify ports 1 to 5, type 1/1-5
W310-1# set port spantree force-protocol-migration 1/1
port 1/1 is forced to send a Rapid spanning tree BPDU
Syntax Description
<module/port> 1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
• To specify ports 1 to 5, type 1/1-5
<value> Number representing the priority of the bridge. The priority can
range from 0 to 24 in increments of 16. 0 indicates high priority
and 240 indicates low priority. The default value is 128.
!
Priority value 0 will set the port to Root port.