Avaya W310, Справочник по командам

Страница: 290 / 440

Chapter 11 W310 Port Commands
274 Avaya W310 Command Reference Guide
set port name
User level: privileged, supervisor.
Use the
set port name
command to configure a name for a port. If you do not specify a
name, the port name remains blank.
Syntax:
The syntax for this command is:
set port name <module/port> [<name>]
Example:
Syntax Description
<module/port> 1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
• To specify ports 1 to 5, type 1/1-5
[<name>] Name (up to 16 characters)
!
To define a name that includes spaces, you must enclose
the entire name in quotation marks, for example “new
york”.
W310-1# set port name 1/12 arthur
Port 1/12 name set.