manualshive.com logo in svg

Avaya Virtual Services Platform 7200 Series, Инструкция по установке

Поделиться
Скачать
Avaya Virtual Services Platform 7200 Series Скачать руководство пользователя страница 21

• An adequate power source is within 6 feet (1.83 meters) of the switch.

One 15-amp circuit is required for each power supply.

• At least 2 inches (5.08 centimeters) of clearance on the front and back

of the switch for ventilation.

• Cables should be dressed to prevent blocking air flow.

Package contents

The following describes the components that are provided with each switch. If any components are
missing, contact the switch vendor.

1. Avaya Virtual Services Platform 7200 (either a VSP 7254XSQ or VSP 7254XTQ

2. Rack-mounting hardware that includes:

• Rack-mount brackets

• Screws to attach brackets to the switch

• Screws to secure the switch to the equipment rack

3. The VSP 7200 supports two field-replaceable power supplies (either front-to-back or back-to-

front). One power supply ships with the unit.

4. Power cord

• The VSP 7200 “A” models (EC7200A1B-E, EC7200A1F-E6, EC7200A2B-E6, and

EC7200A2F-E6) do not include a power cord for the AC power supply. All other models
include a country-specific power cord.

• The VSP 7200 DC models (EC720001F-E6 and EC720002F-E6) ships with a DC power

supply wiring assembly for the DC power supply.

5. Three field-replaceable fan modules (either front-to-back or back-to-front)

6. Documentation

Note:

A 300mm-900mm slide rack mounting kit is available as an option.

Installing a power supply

The VSP 7254XSQ and the VSP 7254XTQ ship with a power supply, but it is not installed in the
chassis. Refer to the following procedures to install either an AC or a DC power supply.

There are two power supply slots (PSU1 on the left side and PSU2 on the right).

• If you only have one power supply, you can install it in either PSU1 or PSU2. 

Package contents

November 2016

Installing the Avaya VSP 7200 Series

21

Comments on this document? [email protected]

Содержание Virtual Services Platform 7200 Series




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды