the device. The detailed status also indicates if any identity certificate was installed on
the device before FIPS mode is enabled.
The Configuration verifier screen only displays this status if FIPS mode is enabled for
your setup.
•
Camera Status
: Validates whether the camera for the device is enabled.
3. To see the details for one of the configuration items, tap the appropriate item.
The configuration verifier displays the configuration details and status. If the status is
NOTICE or FAIL, the verifier displays the possible reasons for the configuration failure.
Sometimes the configuration might be correct, but verification might fail because of
network connectivity issues.
Sharing device configuration information
About this task
Use this procedure to share screen captures of the Configuration verifier screen with your
administrator. This is useful if configuration information is missing. You can share the main screen
or you can tap an item on the list and share a detailed screen capture. For example, you might
need to share the details of an item with the “FAIL” status.
Procedure
1. Tap
Settings
>
Debugging options
>
Configuration verifier
.
2. From the menu in the upper-right corner of the screen, tap
Share
to capture and share the
Configuration verifier screen.
3. Select one of the following options:
•
Send via Bluetooth
: To send the screen capture to another device using a Bluetooth
file transfer.
•
Save to external USB storage device
: To save the screen capture to a USB device.
You can then send it to your administrator.
Configuring Wi-Fi from the Settings menu
About this task
Use this procedure to configure a Wi-Fi network using the
Settings
menu on the device.
Avaya highly recommends to use 5G Wi-Fi networks when connecting Bluetooth devices to Avaya
Vantage
™
.
Procedure
1. Tap
Settings
.
Configuring Wi-Fi from the Settings menu
April 2021
Using Avaya Vantage
™
39
