Page 1
Avaya IP Office UC110 Module
Installation and Set Up
Telquest Tech Support
Note: The UC110 will only work on KSU's with Release 8.0 and higher.
Power the KSU down
Install the UC110 Module in any slot.
Power the KSU up.
Connect the KSU and your computer to the same LAN.
Do not use the RJ-45 Jack on the front of the UC 110 Module.
The UC110 can be accessed by using the IP Address of the KSU followed by Port Number 7070
Example:
If your KSU is 192.168.1.123 then the UC110 will be found at http://192.168.1.123:7070
The Logon is:
webcontrol
The Password is:
web
Button and LED Info for the UC110 Module, Front View:
DO NOT Connect to this port... DO NOT remove the protective cover...