Avaya Session Border Controller for Enterprise Скачать руководство пользователя страница 7

Страница: 7 / 78

Chapter 1: Introduction

Purpose

This guide provides information about how to install and configure Avaya Session Border Controller

for Enterprise (SBCE) in a Session Initiation Protocol (SIP) enterprise VoIP network.

Intended audience

This document is intended for anyone who wants to install, configure, and verify Avaya SBCE. The
audience includes and is not limited to implementation engineers, field technicians, business
partners, and customers.

Document changes since last issue

The following changes have been made to this document since the last issue:

• Included panel descriptions and specifications of the Dell R320 server that Avaya SBCE

supports from Release 6.3.2.

• Included information about running scripts before installing Avaya SBCE on a Dell R320 server.

Related resources

Documentation

The following table lists the documents related to this product. Download the documents from the
Avaya Support website at

http://support.avaya.com

August 2015

Deploying Avaya SBCE

Comments on this document? [email protected]

Содержание Session Border Controller for Enterprise















































































Результаты поиска

Содержание Session Border Controller for Enterprise

Отзывы:

Avaya Session Border Controller for Enterprise, Руководство пользователя, Страница: 7 / 78

Результаты поиска

Содержание Session Border Controller for Enterprise

Отзывы: