Front view of Dell R320 Server
No.
Item
Icon
Description
1
Power-On Indicator, Power
Button
The power-on indicator lights when the system power
is on. The power button controls the power supply
output to the system.
Note:
On ACPI-compliant operating systems, turning off
the system using the power button causes the
system to perform a graceful shutdown before
power to the system is turned off.
2
NMI Button
Used to troubleshoot software and device driver errors
when running certain operating systems. This button
can be pressed using the end of a paper clip.
Use this button only if directed to do so by qualified
support personnel or by the operating system
documentation.
3
System Identification Button
The identification buttons on the front and back panels
can be used to locate a particular system within a rack.
When one of these buttons is pressed, the LCD panel
on the front and the system status indicator on the
back flashes blue until one of the buttons are pressed
again.
Press to toggle the system ID on and off. If the system
stops responding during POST, press and hold the
system ID button for more than five seconds to enter
BIOS progress mode.
To reset the iDRAC (if not disabled in F2 iDRAC setup)
press and hold the button for more than 15 seconds.
4
Video Connector
Allows you to connect a VGA display to the system.
5
LCD Menu Buttons
Allows you to navigate the control panel LCD menu.
Table continues…
Hardware overview
18
Deploying Avaya SBCE
August 2015