Avaya Scopia Elite 5200 Series, Руководство по платформе, Страница: 23 / 35

16 <Book title goes here>
How to Rack Mount the MCU
Figure 2-6 SCOPIA Elite MCU Chassis
Procedure
1
Lift the SCOPIA Elite MCU chassis according to the instructions in the
Chassis Lifting Guidelines section on page 14
2 Ensure the front of the chassis faces front and place the chassis on the
shelf brackets.
3
Secure the chassis to the rack posts through the holes in the integral
mounting brackets. Make sure to use all the screws provided to secure
the chassis to the rack posts.
A
TTACHING THE
S
YSTEM
G
ROUND
Before connecting power or turning ON power to the MCU, it strongly
recommend that you provide an adequate chassis ground (earth) connection for
the chassis.
You must use size AWG 18 (1 mm2) or larger wire, and an appropriate
user-supplied ring terminal.
Warning This equipment must be grounded. Never defeat the ground conductor
or operate the equipment in the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or an electrician if you are
uncertain that suitable grounding is available.Connect the AC power receptacle to
the AC power source with the provided power cable.