manualshive.com logo in svg

Avaya S8510, Руководство пользователя, Страница: 9 / 84

Поделиться
Скачать
Avaya S8510 Скачать руководство пользователя страница 9

Before going to the customer site

03-602953 Issue 1 June 2008

9

Before going to the customer site

Download the following to the laptop that you will use at the customer site:

1. Communication Manager license file and authentication (password) file from the RFA site.

2. Software service pack

3. Security updates

4. Firmware upgrades:

- Server Availability Management Processor™ (SAMP)

- Media gateway

- Media module(s)

- IP telephone firmware

The Avaya Support URL is 

http://support.avaya.com/downloads.

The RFA URL is 

http://rfa.avaya.com/

.

Replacing the S8510 server

Back up data

To back up the data on the S8510 Server:

1. Connect your laptop to the server’s service port using the crossover cable.

2. At a browser on your laptop log in to the Maintenance Web Pages (192.11.13.6).

Note:

Note:

You might need to clear the ARP cache on your laptop (issue the 

arp -d 

192.11.13.6

 command from the laptop’s command line) before you connect to 

the Maintenance Web Pages.

3. At the Maintenance Web Pages select 

Data Backup / Restore > Backup Now

.

The 

Backup Now

 page displays.

4. In the Data Sets section select (check) all of the following data sets:

-

ACP Translations

 and 

Save ACP translations before backup

.

- Server and System Files

Содержание S8510





















































































Отзывы:

Нет отзывов