Avaya S8510, Руководство пользователя, Страница: 63 / 84

Replacing a power supply in the S8510 with dual power supplies
03-602953 Issue 1 June 2008 63
3. With your thumb press the release tab on the power supply in bay 2 (see Note 1 in
Figure 19 ).
Figure 19: Removing the redundant power supply in the S8510 Server
4. Grasp the handle (Note 2 in Figure 19 ).
5. Pull the power supply out of the bay.
6. Set the defective power supply aside; you will return it to Avaya later.
Replace the power supply
To replace the power supply:
!
WARNING:
WARNING:
To reduce the risk of electric shock or damage to the equipment, do not connect
the power cord to the power supply until you install the power supply.
1. Slide the power supply into the power supply bay (see Note 3 in Figure 19 ).
2. Ensure that the tab is locked into place (see Note 1 in Figure 19 ) and the power supply is
securely seated in the bay.
Figure notes:
1. While grasping the handle press
the thumb release tab. 2. Pull the power supply out of the bay.
hw851p2r LAO 021308
2
1