Avaya S8400, Установка и настройка, Страница: 33 / 80

Verifying the media server connection to the customer LAN (if provided)
Installing and Configuring the Avaya S8400 Media Server February 2007
33
Verifying the media server connection to the customer
LAN (if provided)
1. From the Maintenance Web Interface, under Diagnostics, click Ping .
2. Select Host Name Or IP Address and type the IP address of a computer on the network.
3. Click Execute Ping .
4. Verify that the ping was successful and indicates that the media server is connected to the
customer network.
5. If DNS is administered, type the host name of a computer on the network.
6. Click Execute Ping .
7. Verify that the ping was successful and indicates that DNS is working.
If possible, have a customer representative perform the following test from a computer on the
network:
1. Click Start > Run to open the Run dialog box.
2. Type
command
and click OK to open an MS-DOS command window.
3. Type
ping serveripaddress
and press Enter , where
serveripaddress
is the IP
address of the media server.
4. Verify that the ping was successful.
5. If DNS is administered, type
ping servername
and press Enter , where
servername
is
the host name of the media server.
6. Verify that the ping was successful.
Configuring the modem
1. From the Maintenance Web Interface, under Server Configuration click Configure Server .
2. Click Continue until you get to the Specify how you want to use this wizard page.
3. Select Configure individual services and click Continue .
4. On the menu on the left, click Set Modem Interface .
5. Select Change Modem Setting and click Continue .