Replacing an S8100 Media Server’s hard drive
Access keys
Upgrade Job Aids for S8100
13
November 2003
Replacing an S8100 Media Server’s hard
drive
This Job Aid provides the steps for replacing the hard drive on the S8100 Media Server (TN2314) circuit
pack. The media server’s software release on the new hard drive may be the same as, or later than, the
software release on the hard drive to be replaced. If the media server’s software release on the new hard
drive is earlier than the software release on the hard drive to be replaced, you must upgrade the software
on the new hard drive after the replacement.
Access keys
The access method for each step is identified by the following keys:
LT
Technician’s laptop
LT-IE
Internet Explorer / Web interface on the laptop
SDT
S8100’s Windows desktop
SDT-IE
Internet Explorer/Web interface on the S8100’s Windows desktop
(Note that SDT and SDT-IE are opened inside of LT-IE.)
BS
Bash shell on S8100’s Windows desktop
LAC
LAC shell
SAT
System-administration terminal
{...}
Information in braces is for Windows 2000