Avaya Remote Access Module 4, Справочник по аппаратуре, Страница: 15 / 41

Section 1: Introduction to ArgentOffice
Revision 5
15
C
ONNECTION TO AN
X.21, V.35
OR
V.24/V.28 L
EASED
L
INE
The Leased Line port on the rear of the ArgentOffice is labelled as follows:
WAN
This port supports a single synchronous data connection, and can support an X.21, V.35
or V.24/V.28 interface. The selection of the required interface is automatically
determined from the pin-out of the cable plugged into the ‘WAN’ port.
Connection to a Digital Leased Circuit is made by connecting the WAN port on the rear
of the ArgentOffice to the supplied Network Terminating Unit (NTU) via the appropriate
X.21, V.35 or V.24 cable. This cable can be purchased from any Alchemy Series
Technologies reseller/distributor by ordering the appropriate Sales Feature as detailed in
the table below, or the user can supply his own cable so long as the criteria set out in
Cables, page 24 are adhered to.
Cable Type Cable Part Number Cable Sales Feature
V.24/V.28 Cable CABV28SN03M0PP00 ARG-WANV24C
V.35 Cable CABV35SN03M0PP00 ARG-WANV35C
X.21 Cable CABX21SN03M0PP00 ARG-WANX21C
A
UDIO
I
NPUT
C
ONNECTOR
A standard 3.5mm Stereo Audio Jack Socket is provided for users who wish to take
advantage of the Music on Hold feature provided by the ArgentOffice product range.
The Audio Input port will accept Stereo or Mono 3.5mm Jack Plugs and is labelled as
follows:
AUDIO
Details of the Audio Input port’s electrical specifications can be found in Technical
Specifications, page 39, and details of the port pin-out can be found in Port Pinouts, page
18.