Avaya programming and use, Инструкция по установке и эксплуатации, Страница: 86 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Setting the Date, Day, and Time
3-12
System Time (#103)
3
Use this feature to set the time that appears on system display telephones.
Considerations
3
■
Enter the time in 24-hour notation. In this scheme, the hours of the day are
0000
(12 midnight) to
2359
(11:59 p.m.). Since each time must have four digits, use leading
zeros when necessary.
■
The time appears on system display phones as a.m. or p.m. (not in 24-hour notation).
Programming
3
To change the System Time:
1. Press
f00ss#103
at extension 10 or 11.
2. Enter a new time in 24-hour notation. For example, to set the time to 2:15 p.m., press
1415
.
A display similar to the following appears:
System Time
Data 1415
This time appears on system display phones as
2:15 p
.
3. Select another procedure, or exit programming mode.
Automatic Daylight/Standard Times (#126)—Release
3.0 or Later
3
This feature automatically updates the system clock for annual Daylight Savings Time and
Standard Time changes. Turn this feature off if you live in an area without daylight savings time.
Programming
3
To change the status of Automatic Daylight/Standard Time:
1. Press
f00ss#126
at extension 10 or 11.
2. Press
D
until the appropriate value appears:
■
1 = Active (the factory setting)
■
2 = Not Active (the factory setting for Hong Kong Release 3.0 only.)
3. Select another procedure, or exit programming mode.