Avaya programming and use Скачать руководство пользователя страница 397 | Manualshive

Страница: 397 / 468

Avaya programming and use Скачать руководство пользователя страница 397

Troubleshooting

System Telephone Problems

11-7

Display Is Incorrect

1

1

Possible Cause: Date, day, and time are not set properly.

What to do: Re-enter the date, day, and time using System Date (#101), System Day (#102), and
System Time (#103).

■

If the display is correct, the problem is solved.

■

If the display is still not correct, see

“System Telephone Does Not Work” on page 11-6

Display Shows “ReplaceSysBat W/Power On”
or “ChgBat W/PowerOn” at Extensions 10 and 11

1

1

Possible Cause: System battery power is low.

What to do: Replace the system batteries (see

“Inserting Batteries in the Processor Module” on

).

Display Does Not Show Caller ID Name/Number

1

1

Possible Cause 1: Not receiving Caller ID service from local telephone company.

What to do: Contact your local telephone company to check on Caller ID service.

■

If you are not receiving Caller ID service, subscribe to it.

■

If you are receiving Caller ID service, go to Possible Cause 2.

Possible Cause 2: Line connected to a module that does not support Caller ID.

What to do: Make sure lines with Caller ID service are connected to a processor, 206EC, 308EC,
or 400EC module. If Caller ID lines are not connected to one of these modules, install the
appropriate modules and/or make the appropriate connections.

Possible Cause 3: Someone activated Call Coverage.

What to do: Check the system telephone display.

■

If

Coverage

Call

for

XX

(where XX is the extension that activated the Call Coverage)

appears, the call is a coverage call. Call Coverage displays the extension number of the
person who activated the feature rather than Caller ID information.

■

If

Coverage

Call

for

XX

does not display, call the helpline number listed on the front, inside

cover.

«
...
395
396
397
398
399
...
»

Содержание programming and use





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов