Avaya programming and use Скачать руководство пользователя страница 356 | Manualshive

Страница: 356 / 468

Avaya programming and use Скачать руководство пользователя страница 356

PARTNER

®

Advanced Communications System Installation, Programming, and Use

Station Message Detail Recording (SMDR)

9-40

SMDR Record Type (#608)

9

Use this feature to specify whether all calls or outgoing calls only are to be included on call reports.

Considerations

9

■

The date and time that appear on call reports are determined by System Date (#101) and
System Time (#103).

■

The call report page header prints in the Display Language (#303) specified for extension 10.

■

If Account Code Entry (optional or forced) is used to enter an account code for a call, the
account code prints on the call report. If there are entries in the Forced Account Code List
(#409), only valid account codes and any other entered digits up to 16 print on the call report.

■

Marked System Speed Dial numbers appear on the call report as F nnn, where nnn is the
Speed Dial code.

■

If you use Caller ID, SMDR reports include the telephone numbers of incoming calls.

■

Call records for incoming calls on T1 lines with Direct Inward Dialing (DID) are reported only
if SMDR Record Type (#608) is set to 1=All Calls.

Programming

9

To identify the type of calls to include for call reporting:

1.

Press

f00ss#608

at extension 10 or 11.

2.

Press

D

until the appropriate value appears:

■

1 = All Calls (outgoing and incoming; the factory setting)

■

2 = Outgoing Only

3.

Select another procedure, or exit programming mode.

SMDR Top of Page (#609)

9

Use this feature to notify the system that the printer has been aligned to the top of a new page.
Use this feature after inserting paper, clearing a jam, or to print a new header after changing
SMDR Output Format or SMDR Talk Time. When this feature is used, the system prints a new
call report header.

Considerations

9

■

This procedure is skipped in the sequence of programming procedures when cycling. To use
this procedure, enter the code directly.

■

You can use Display Language (#303) to specify the language in which the call report page
header should print.

«
...
354
355
356
357
358
...
»

Содержание programming and use





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов