Avaya programming and use Скачать руководство пользователя страница 303 | Manualshive

Страница: 303 / 468

Avaya programming and use Скачать руководство пользователя страница 303

Programming & Using Telephone Features

Speed Dialing Features

8-65

Using Personal Speed Dial on a System Telephone

8

To use Personal Speed Dial on a system telephone:

1.

Lift the handset or press

S

before dialing:

2.

Do one of the following:

■

If you want to call on a specific line, press the line button (or press

i8

and the two-

digit line number).

■

If you want to call using a specific pool, press the pool button (or press

i

and the

three-digit pool access code).

3.

Press

f

.

4.

Dial the two-digit Personal Speed Dial code (80–99).

If you did not specify an outside line or pool, the system automatically selects one, turns on the
speaker if the handset is in the cradle, and dials the number. The number being dialed shows
on a display telephone.

Using Personal Speed Dial on a Single-Line
Telephone

8

You can dial Personal Speed Dial on a single-line telephone, but the numbers must be
programmed from extension 10 or 11. To dial a programmed Personal Speed Dial number:

1.

Lift the handset.

You hear intercom dial tone.

2.

Press

#

.

3.

Dial the two-digit Personal Speed Dial code (80–99).

The system automatically selects an outside line and dials the number.

«
...
301
302
303
304
305
...
»

Содержание programming and use





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов