Avaya programming and use Скачать руководство пользователя страница 288 | Manualshive

Страница: 288 / 468

Avaya programming and use Скачать руководство пользователя страница 288

PARTNER

®

Advanced Communications System Installation, Programming, and Use

Paging Features

8-50

Programming

8

To program a Loudspeaker Paging button:

1.

Press

f00

.

2.

Press a programmable button.

3.

Press left

i70

.

4.

Program another button for this extension, or exit programming mode.

Using Loudspeaker Paging on a System Telephone

8

To make an announcement over the Loudspeaker Paging system:

1.

Press the programmed button or

i70

; then lift the handset.

2.

Speak into the handset. (To avoid feedback, do not use the speakerphone.)

Your voice is heard through the Loudspeaker Paging system.

Using Loudspeaker Paging on a Single-Line
Telephone

8

To make an announcement over the Loudspeaker Paging system:

1.

Lift the handset.

You hear intercom dial tone.

2.

Dial

70

.

3.

Speak into the handset.

Your voice is heard through the Loudspeaker Paging system.

If your paging system supports announcements to zoned areas, refer to the
instructions packaged with the paging device to make zoned announcements.

For touch-tone telephones only, if your Loudspeaker Paging system supports
announcements to zoned areas, refer to the instructions packaged with the paging
device to make zoned announcements.

«
...
286
287
288
289
290
...
»

Содержание programming and use





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов