Avaya programming and use, Инструкция по установке и эксплуатации, Страница: 286 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Message Light On (F09XX) and Message Light Off (F10XX)
8-48
Message Light On (F09XX) and Message
Light Off (F10XX)
8
A lit message light indicates that you have a message in your mailbox. You can turn the message
light on or off by using Message Light On or Message Light Off, respectively. The “XX” in the
code represents the extension number.
Considerations
8
■
For message-waiting capability, single-line telephones with LED-compatible message-waiting
lights must be connected to a processor module, a 308EC module, or to an R3.0 or later 206
module.
■
Do not use this feature for an extension that is covered by the voice messaging system. The
voice messaging system automatically turns on/off the message light at a subscriber’s
extension when messages in the mailbox have been received/deleted.
If a message light is inadvertently turned off at an extension that has a message in the
mailbox, the message light is refreshed during the voice messaging system’s daily
maintenance (3 a.m.).
■
You can use Message Light On with a doorphone (for example, the doorphone’s light flashes
as a prearranged signal to a delivery person) provided the doorphone is connected to a
processor module or to an R3.0 or later 206 module. If you use the Message Light On feature
to signal someone at a doorphone extension, you must use Message Light Off to turn the
light off.
■
You can program a Message Light On or a Message Light Off button on a system telephone
to turn the Message Light On or off at a specific extension with one touch.
■
On a single-line telephone, the message light flashes (only when the telephone is idle) to
indicate that the extension has received a message.
Programming
8
To program a Message Light On or a Message Light Off button:
1. Press
f00
.
2. Press a programmable button.
3. Press
f09
for a Message Light On button or
f10
for a Message Light Off
button.
4. Optionally, dial the two-digit extension number of your most common destination, or skip to
Step 5 if you want only the feature code on the button.
5. Program another button for this extension, or exit programming mode.