Avaya programming and use, Инструкция по установке и эксплуатации, Страница: 274 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Do Not Disturb (F01)
8-36
Using Direct Line Pickup—Idle Line on a Single-Line
Telephone
8
To use Direct Line Pickup—Idle Line on a single-line telephone:
1. Lift the handset.
You hear intercom dial tone.
2. Dial
8
and the two-digit system line number of the idle line you want to access.
Do Not Disturb (F01)
8
Use this feature to be able to press a programmed button to prevent incoming calls for the
extension from ringing (lights still flash). When Do Not Disturb is on, outside callers hear ringing
while inside callers hear a busy signal. You should use Do Not Disturb only if someone answers
outside calls for your extension when you do not answer them.
Considerations
8
■
Do Not Disturb is available only on system telephones.
■
Do Not Disturb requires a button with lights. When the Do Not Disturb feature is on, the light
is also on, indicating that the telephone will not ring.
■
Use Do Not Disturb when you do not want the auto attendant or the voice messaging system
to transfer calls to you.
■
Use Do Not Disturb if you are assigned to a Hunt Group and you leave your desk, so calls to
the Hunt Group will skip your extension and ring immediately at the next available extension
in the group.
■
To avoid missing calls when Do Not Disturb is not needed, turn it off.
■
If Do Not Disturb is active at a doorphone alert extension, the person at the doorphone hears
signaling, but the alert extension is not signaled.
■
Unanswered calls that are transferred from an extension with Do Not Disturb active ring at
that extension if they transfer return.
■
Extensions with Do Not Disturb activated do not receive Caller ID information, unless the call
is answered.
■
Users with Automatic VMS Cover Assigned or with VMS Cover turned on can activate Do
Not Disturb to Send All Calls immediately to their voice mailbox.
■
Users with Call Coverage turned on can activate Do Not Disturb to Send All Calls
immediately to the covering extension.
■
You cannot use Call Screening (F25) when Do Not Disturb is turned on.