Avaya programming and use Скачать руководство пользователя страница 269

Страница: 269 / 468

Programming & Using Telephone Features

Conference Drop (F06)

8-31

Conference Drop (F06)

Use this feature to drop the last outside party added to a conference call without disconnecting the
other parties.

Considerations

■

You can program a Conference Drop button on a system telephone to use the feature with
one touch.

■

This feature cannot be used with Call Screening (F25).

Programming

To program a Conference Drop button:

Press

f00

Press a programmable button.

Press

f06

Program another button for this extension, or exit programming mode.

Using Conference Drop on a System Telephone

Press the programmed button or

f06

. The last-added outside party is dropped from the

conference.

Using Conference Drop on a Single-Line Telephone

Press the switchhook down once rapidly. The last-added party (inside or outside) is dropped from
the conference.

Содержание programming and use





















































































































































































































































































































































































































































































Результаты поиска

Содержание programming and use

Отзывы:

Avaya programming and use, Инструкция по установке и эксплуатации, Страница: 269 / 468

Результаты поиска

Содержание programming and use

Отзывы: