Avaya programming and use, Инструкция по установке и эксплуатации, Страница: 268 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Cell Phone Connect (F11)
8-30
To remove Cell Phone Connect by using the programmed button:
1. Press the programmed button.
If an originating extension and a destination extension were programmed on the button, Cell
Phone Connect is deactivated (on a button with lights, the green light is off). Skip Steps 2 and
3.
2. If no originating extension was programmed, dial your extension number.
3. If no destination extension was programmed, dial your extension number again.
Cell Phone Connect is deactivated (on a button with lights, the green light is off).
Using Cell Phone Connect on a Single-Line
Telephone
8
To forward your calls:
1. Lift the handset.
You hear intercom dial tone.
2. Press
#11
.
3. Dial your extension number.
4. Dial
*
and the two-digit Personal Speed Dial code (80-99) that contains the destination
outside telephone number at which you want the calls to ring.
To remove Cell Phone Connect:
1. Lift the handset.
You hear intercom dial tone.
2. Press
#11
.
3. Dial your extension number twice.