Avaya programming and use, Инструкция по установке и эксплуатации, Страница: 267 / 468

Programming & Using Telephone Features
Cell Phone Connect (F11)
8-29
Programming
8
To program a Cell Phone Connect button:
1. Program a Personal Speed Dial that contains the telephone number to which you want to
forward calls. See
“Personal Speed Dial” on page 8-63 .
1. Press
f00
.
2. Press a programmable button, preferably a button with lights.
3. Do one of the following:
■
Press
f11
.
■
Press
f11
and the number of the originating extension.
■
Press
f11
, the number of the originating extension,
*
, and the two-digit Personal
Speed Dial code (80-99) that contains the destination outside telephone number at which
you want the calls to ring.
4. Program another button for this extension, or exit programming mode.
Using Cell Phone Connect on a System Telephone
8
To forward calls manually:
1. Press
f11
.
2. Dial your extension number.
3. Dial
*
and the two-digit Personal Speed Dial code (80-99) that contains the destination
outside telephone number at which you want the calls to ring.
To remove Cell Phone Connect manually:
1. Press
f11
.
2. Dial your extension number twice.
To forward calls using the programmed button:
1. Press the programmed button.
If an originating extension,
*
, and a Personal Speed Dial code (80-99) were programmed on
the button, Cell Phone Connect is activated (on a button with lights, the green light is on).
Skip Steps 2 and 3.
2. If no originating extension was programmed, dial your extension number.
3. If no destination telephone number was programmed, dial
*
and the two-digit Personal
Speed Dial code (80-99) that contains the destination outside number at which you want the
calls to ring.
Cell Phone Connect is activated (on a button with lights, the green light is on).