Avaya programming and use Скачать руководство пользователя страница 167 | Manualshive

Страница: 167 / 468

Avaya programming and use Скачать руководство пользователя страница 167

Programming System Options

Voice Interrupt On Busy (#312)

4-69

Considerations

4

■

The Voice Interrupt On Busy tone (two beeps) is unique to distinguish it from a voice-
signaled intercom call tone (one beep).

■

If a Voice Interrupt On Busy call is made to an idle extension, the originator and the recipient
hear a voice-signaled intercom call tone (one beep) instead.

■

If you receive a Voice Interrupt On Busy call and press

h

, the third party is put on hold

and the originator hears two beeps that indicate you have ended the Voice Interrupt On Busy
call. Do one of the following:

— To talk to the originator, if the green light next to the

i

button is flashing, press

i

. (You cannot use the Voice Interrupt On Busy Talk-Back button once a Voice

Interrupt On Busy call has ended.)

— To resume your conversation with the third party, press the line or pool button next to the

winking green light.

■

Any party involved in a Voice Interrupt On Busy call cannot be involved in a second Voice
Interrupt On Busy call until the first is finished.

■

Voice Interrupt On Busy cannot be performed on Record-a-Call.

■

The recipient can use a Voice Interrupt on Busy Talk-Back button to respond to the originator
of the Voice Interrupt On Busy call. The recipient’s response is not heard by the third party.

■

Users cannot receive Voice Interrupt On Busy calls if:

— Do Not Disturb is active at their extension.

— They are part of a joined call (Joining Calls).

— They are part of a Conference Call.

— They are recording a call by using Record-a-Call (F24).

— They are screening a call by using Call Screening (F25).

Programming

4

To change the Voice Interrupt On Busy setting for an extension:

1.

Press

f00ss#312

at extension 10 or 11.

2.

Enter the number of the extension to be programmed with this feature.

3.

To assign or unassign Voice Interrupt On Busy, press

D

until the appropriate value

appears.

■

1 = Assigned

■

2 = Not Assigned (the factory setting)

4.

Select another procedure, or exit programming mode.

«
...
165
166
167
168
169
...
»

Содержание programming and use





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов