Avaya programming and use Скачать руководство пользователя страница 156 | Manualshive

Страница: 156 / 468

Avaya programming and use Скачать руководство пользователя страница 156

PARTNER

®

Advanced Communications System Installation, Programming, and Use

Ring on Transfer (#119)

4-58

Ring on Transfer (#119)

4

Use this feature to specify what callers hear while they are being transferred. If Ring on Transfer
is set to Active, callers hear ringing as they are being transferred; if it is set to Not Active, callers
hear silence unless Music-On-Hold is activated and an audio source is connected to the system.
If this is the case, callers hear music while the call is being transferred to the destination extension.
Once there, callers hear ringing until the call is answered or is sent to the voice messaging system.

Considerations

4

■

If you have an audio source connected to the system, set Music-On-Hold (#602) to Active
and Ring on Transfer to Not Active so callers hear music as they are being transferred to the
destination extension.

■

This feature has no effect on Direct Extension Dial or Call Park.

Programming

4

To change Ring on Transfer:

1.

Press

f00ss#119

at extension 10 or 11.

2.

Press

D

until the appropriate value appears:

■

1 = Active (the factory setting)

■

2 = Not Active

3.

Select another procedure, or exit programming mode.

Rotary Dialing Timeout (#108)

4

Use this feature to change the length of the Rotary Dialing Timeout. You may need to change the
length of the timeout if you have any rotary lines and you are having trouble calling out on tip/ring
touch-tone telephones. For example, if users dial slowly and calls are not completed or are
connected to wrong numbers, lengthen the timeout.

Considerations

4

■

Do not change this setting unless the system is experiencing problems.

■

Use this feature only if the Dial Mode (#201) for at least one outside line in the system is set to
rotary.

«
...
154
155
156
157
158
...
»

Содержание programming and use





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов