Avaya P333R, Руководство пользователя

Страница: 73 / 270

Chapter 5 CLI – Layer 2
Avaya
P333T-PWR User’s Guide
53
show port security
Use the
show port security
command to list the security mode of the ports of a
switch or stack. When no port number is specified, this command displays all the
secured ports in the stack.
The syntax for this command is:
show port security [<module>[/<port>]]
Example:
P330-N> show port security 1
Port 1/1 port security disabled.
Port 1/2 port security disabled.
Port 1/3 port security disabled.
Port 1/4 port security disabled.
Port 1/5 port security disabled.
etc.
Note: Port security for the P330-ML switches will always have the value
unknown
.
This command is used to display the security status of other P330 switches ports in
the stack.
show port blocking
Use the
show port blocking
command to display the port blocking mode on a
particular switch. Use the
session
command to login into the requeested switch
before using this command.
The
show port blocking
command is used with the
show self-loop discovery
command to confirm a port’s blocking mode.
The syntax for this command is:
show port blocking
Note: This command is not supported by the P330-ML switches.
Note:
If this command is to be implemented on a switch other than the stack master,
a session should be opened to the relevant switch.