Avaya P333R, Руководство пользователя

Страница: 121 / 270

Chapter 5 CLI – Layer 2
Avaya
P333T-PWR User’s Guide
101
The syntax for this command is:
set port channel [port_list] [value] [name]
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Output Example:
P330-1(super)# set port channel 1/1-3 on test
Port 1/1 channel mode set to on
Port 1/2 was added to channel
Port 1/3 was added to channel
set port classification
Use the
set port classification
command to set the port classification to
either regular or valuable. Any change in the Spanning Tree state from Forwarding
for a valuable port will erase all learnt MAC addresses in the stack.
The syntax for this command is:
set port classification [module/port] {regular | valuable}
Output Example:
P330-1(super)# set port classification 2/19 valuable
Port 2/19 classification has been changed.
port_list Switch and ports to bundle (format: module/port)
value on/off to enable/disable a channel for the specified module
ports
name Channel name
module port switch/port range
regular | valuable port classification