H323 Telephone Installation
Page 21
Issue 23e (Friday, February 15, 2019)
IP Office™ Platform 11.0
Comments on this document? [email protected]
IP Office H.323 IP Phones: Phone File Requests
1.16 Additional Phone Settings
The
46xxsettings.txt settings files are suitable for most installations. However, in some scenarios it
may be necessary to amend the value of the file settings or to add additional settings. This can be done in a number of
ways:
·
Using Static Files:
Replace the auto-generated file with an actual file. The method is only recommended for those experienced with the
editing of Avaya phone settings files. The major drawback is that you no longer benefit from the automatic changing
of settings to match changes in the IP Office configuration. See
.
·
Use a 46xxspecials.txt File:
If a file called 46xxsettings.txt is present on the system, then the auto-generated 46xxsettings.txt file instructs the
phone to request that file. This allows you to upload a special file that contains any additional settings or override
selected settings in the auto-generated file. See
.
·
Use NoUser Source Numbers:
There are a number of NoUser source number settings that can be used to add special values to the auto-generated
settings file. See
.
Common Additional Commands
The following are some of the frequently used additional commands. For full details of commands available refer to the
appropriate Avaya administrator's manual for the particular series of phones.
Function
Description
Setting File Command
Password/CRAF
T
Set the PROCPSWD specified in the auto-generated
46xxsettings.txt file where X is the password. This is useful
scenarios such as TLS operation which cannot be enabled on
phones with the default PROCPSWD.
SET PROCPSWD X
Administrators
Password
Set the Vantage phone administrator password specified in
the auto-generated 46xxsettings.txt file where X is the
password.
SET ADMIN_PASSWORD X
Headset
Operation
By default, the phone headset goes back on-hook when the
other party disconnects. Setting this source number changes
that behavior so that headset remains off-hook when the
other party disconnects.
SET HEADSYS 1
Backlight Timer
Sets the timer in minutes for the phone backlight timer.
SET BAKLIGHTOFF 60
Screen Saver
This set of commands 1) enable the screen saver, 2) set the
name of screen saver to download and 3) sets the name of
the current downloaded file to use.
SET SCREENSAVERON
SET SCREENSAVER_IMAGE J179scr_svr.jpg
SET SCREENSAVER_IMAGE_DISPLAY J179scr_svr.jpg
Background
Image
This set of commands 1) set the name of the background
image to download and 2) the name of the current
downloaded file to use.
SET BACKGROUND_IMAGE J179bck_grnd.jpg
SET BACKGROUND_IMAGE_DISPLAY J179bck_grnd.jpg
·
There are several
NoUser
source numbers used for remote extension. They operate differently in that they change
existing values in the auto-generated settings file given to a phone when the system detects that the phone
requesting the file is a remote extension. See the
"IP Office SIP Phones with ABSCE"
manual.
20
23
22
22