Configuring for Application Support
An application assigned to a line uses an IP address to make an outbound call. Identify the line in
the application in one of the following ways.
1. Specify the IP address in the application block in place of the dial number. Use the following
format to specify the address:
I<port>,<Interface address>
where the port standard is 1720 and the Interface address is specified in dot notation.
2. When originating a call from an RFC3261 compliant application on a networked PC, use the
AP-to-TMS IP address.
Configuring the Terminal Server
Table 4: Terminal Server Port Mapping
Equipment
Default IP
Address
Telnet Port
Serial Port
Async Port
Rear Panel
Terminal Server
10.7.200.50
Diag port to first OSCAR
MPS500-2 (Vrc-2 NIC)
10.7.0.2
3200
Console
12
MPS500-1 (Vrc-1 NIC)
10.7.0.1
3100
Console
11
BPS-2000
Console Port
3600
Console
16
Speech Server101-9
10.7.101.9
Speech Server101-8
10.7.101.8
Speech Server101-7
10.7.101.7
Speech Server101-6
10.7.101.6
Speech Server101-5
10.7.101.5
Speech Server101-4
10.7.101.4
Speech Server101-3
10.7.101.3
Speech Server101-2
10.7.101.2
Speech Server101-1
10.7.101.1
COM1
1
Diag port
MpsAp1
10.7.200.1
2100
LOM
1
2300
ttyb
3
MpsAp2
10.7.200.2
2200
LOM
2
2400
ttyb
4
MpsAp3
10.7.200.3
2500
LOM
5
Configuring for Application Support
October 2014
Avaya Media Processing Server 500 Hardware Installation and Maintenance
77