14. Click OK to finish enabling remote desktop sharing.
Verifying and Modifying Boot ROM Settings
The TMS and DCC contain field programmable gate arrays (FPGA) that must be loaded with an
image that provides the functionality for the board. These images are loaded whenever SRP starts.
The boot ROM defines parameters such as which image file to load, the clock frequency of the
board, IP addresses, and other local parameters. When the system is installed, you must verify and,
if necessary, modify the default factory settings to ensure the correct image files are loaded and that
the local IP addresses for the TMS and server (where the image definition files [*.idf] reside) are
correct.
Whenever you install a new system and add or replace assemblies, the boot ROM must be verified
and, if necessary, modified. When you replace or add assemblies, you need only check the boot
ROM on the associated TMS.
Verifying and Modifying Boot ROM Settings
October 2014
Avaya Media Processing Server 500 Hardware Installation and Maintenance
123