the back of the phone and ensure that the phone does not move when the keys are
pressed.
Plugging in and resetting the deskphone using the
Dynamic Addressing Process
Note:
Before you start this process you must have an extension number for the IP deskphone and
the Communication Manager security code (password) for that extension, unless you intend to
use the deskphone with unnamed registration. Any reference to the HTTP server applies
equally to an HTTPS server. You can run the plug in and reset process successfully using the
following description.
As the deskphone initializes, you see messages, some of which are part of DHCP process, with a
power on indication and dynamic feedback. These messages indicate that the phone is active and
not locked. You also receive useful information, about the status of the network, the server, or the
downloading operations, before the dial tone.
Understanding the plug in and reset process
Plug the phone into the Ethernet wall jack. The phone receives power from the port and performs
the following processes:
Initial setup and connectivity
May 2018
Installing and Administering Avaya J169/J179 IP Phone H.323
24
