background image

The types of Call Transfer are:

• Consultative transfer: Transferring a call by connecting a call with the transfer recipient.

• Blind transfer: Transferring a call without connecting a call with the transfer recipient.

Making a consultative transfer

About this task

Transfer a call by connecting a call with the transfer recipient.

Procedure

1. While on an active call, press 

Transfer

 soft key or 

Transfer

 button.

The phone displays the Enter transfer destination screen.

The first call is placed on hold.

2. Do one of the following:

• Dial the number to transfer the call.

• Search for the number in Contacts or Recents.

• Redial the last dialed number by using the 

Redial

 button.

• Highlight the extension on the phone screen, and press 

Transfer

 button.

3. To initiate a consultative transfer, press 

Talk

.

The call transfer recipient’s phone starts ringing.

4. Do one of the following:

• Press 

Complete

 or 

Transfer

 button after the recipient answers the call.

The call transfer is complete. This is also called attended transfer.

• Press 

Complete

 or 

Transfer

 button after the recipient’s number starts ringing.

The call transfer is complete. This is also called unattended transfer.

Making a blind transfer

About this task

Use this procedure to transfer an active call without connecting a call with the transfer recipient.

Procedure

1. While on an active call, press 

Transfer

 or 

Transfer

 button.

The phone displays the Enter Transfer Destination screen.

Call Transfer

April 2020

Using Avaya J159 IP Phone in an Open SIP environment

81

Comments on this document? [email protected]

Содержание J159






















































































































































Отзывы: