background image

The Network configuration shows following two options:

Auto

: To automatically connect a network.

Manual

: To manually connect to a network.

5. Press one of the following:

Toggle

Right

 arrow key

Left

 arrow key

6. Press one of the following:

Save

OK

Note:

If you do not want your phone to restart and stay in the Manual mode when you switch

Network config

 from 

Auto

 to 

Manual

, press 

Save

.

If you switch 

Network config

 from 

Manual

 to 

Auto

, press 

Save

 and then do either of

the following:

• If the currently-connected network is the same as the pre-configured network that

your administrator has set up, the phone will not restart and stay in the Auto mode.

• If the currently-connected network is not the same as the pre-configured network

that your administrator has set up, the phone will prompt you for permission to
restart before connecting to the pre-configured network.

Related links

Setting the network mode

 on page 134

Connecting to a Wi-Fi network

About this task

Use this procedure if your phone is not configured to connect to a specific Wi-Fi network

Before you begin

• Ensure that the system administrator gave you access to perform this task.
• Select Wi-Fi as your network mode.
• When you set the network mode, note the SSID, as this is the name of the Wi-Fi network that

the phone will attempt to connect to.

• Depending on the type of security in the Wi-Fi network, obtain the required credentials.

Contact your system administrator for more details.

Customization

April 2020

Using Avaya J159 IP Phone in an Open SIP environment

136

Comments on this document? [email protected]

Содержание J159






















































































































































Отзывы: