Note:
The options in the debug mode can be modified if an authentication file is installed.
5. Use the appropriate keys to enable or disable the options.
6. Press
Save
.
Setting the Ethernet interface control
Procedure
1. Press
Main Menu
>
Admin
.
2. In the
Access code
field, enter the admin menu password.
3. Press
Enter
.
4. Select
Ethernet interface
.
5. Use the
Down Arrow
key to select one of the following settings:
•
Ethernet
: To change the Ethernet setting, go to step 6.
•
PC Ethernet
: To change the PC Ethernet setting, go to step 7.
6. Use the
Right Arrow
key or the
Change
softkey to change the Ethernet setting to one of the
following:
•
Auto
•
10Mbps half
•
10Mbps full
•
100Mbps half
•
100Mbps full
7. Use the
Right Arrow
key or the
Change
softkey to change the PC Ethernet setting to one of
the following:
•
Auto
•
10Mbps half
•
10Mbps full
•
100Mbps half
•
100Mbps full
•
Disabled
8. Press
Save
.
Phone administration and configuration
September 2017
Installing and Administering Avaya J129 IP Phone
62
