Avaya J129 Скачать руководство пользователя

Страница: 53 / 133

OpenSSH/OpenSSL version

The phone displays the version of OpenSSL and OpenSSH on the VIEW screen under the ADMIN

menu. This information is displayed when the parameter DISPLAY_SSL_VERSION is set to

SSH Fingerprint

The phone displays SSH fingerprint to manually verify that an SSH connection is established with

the correct phone.

Time synchronization

This feature allows the phone to synchronize the time with the configured NTP servers in intervals.

The parameter SNTP_SYNC_INTERVAL checks the time interval for synchronization.

• Default: 1440 minutes
• 60–2880 minutes

Certificate management

Certificates are used to establish secure communication between network entities. Server or mutual

authentication can be used to establish a secure connection between a client and server. The client

always validates the certificate of the server and maintains a trust store to support this validation. If

the server additionally requires mutual authentication, it requests an identity certificate from the

client. The identity certificate must be provided and validated by the server to establish mutual

authentication. Server must validate the identity certificate to establish a secure connection..

Phones support three types of certificates:

• Trusted certificates
• Online Certificate Status Protocol (OCSP) trust certificates
• Phone identity certificates

The Trusted and OCSP trust certificates are root or intermediate Certification Authority (CA)

certificates that are installed on the phone through the

46xxsettings.txt

file.

Enhancements for installing identity certificates:

• SCEP over HTTPS is supported for enrollment.
• PKCS#12 file format is supported for installation.

To check the number of days remaining for Identity certificate expiry, use the parameter

CERT_WARNING_DAYS . The user is notified through a log message if the log level is maintained

as WARNING with the category CERTMGMT. The logs are maintained and displayed if SYSLOG is

enabled.

MIB object tables and IDs are created for certificates installed on the phone. You can view the

certificate attributes through an SNMP MIB browser.

Certificate management

September 2017

Installing and Administering Avaya J129 IP Phone

Comments on this document? [email protected]

Содержание J129






































































































































Результаты поиска

Содержание J129

Отзывы:

Похожие инструкции для J129

Бренды по названию

Популярные бренды

Avaya J129, Установка и администрирование

Результаты поиска

Содержание J129

Отзывы:

Похожие инструкции для J129

Бренды по названию

Популярные бренды