Setting the Ethernet interface control
Procedure
1. Press
Main Menu
>
Admin
.
2. In the
Access code
field, enter the admin menu password.
3. Press
Enter
.
4. Use the
Down Arrow
to select
Network interface
.
5. Use the
Right Arrow
key to change
Network mode
to
Ethernet
and do one of the
following settings:
•
Network config
: To change the network configuration to either Auto or Manual.
•
Ethernet
: To change the Ethernet setting, go to step 6.
•
PC Ethernet
: To change the PC Ethernet setting, go to step 7.
6. Use the
Right Arrow
key or the
Toggle
soft key to change the Ethernet setting to one of
the following:
•
Auto
•
10Mbps half
•
10Mbps full
•
100Mbps half
•
100Mbps full
7. Use the
Right Arrow
key or the
Toggle
soft key to change the PC Ethernet setting to one
of the following:
•
Auto
•
10Mbps half
•
10Mbps full
•
100Mbps half
•
100Mbps full
•
Disabled
8. Press
Save
.
Group identifier
A group identifier is a number assigned to a particular community of IP phone users in an
organization. The group identifier number can be a number from 0 to 999 and the default number
is 0.
Phone configuration
April 2020
Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment
82